:: Product overview :: Infusion Main Power Enclosure 36 V ::

Intelligent Management and Energy Saving

Experience life in a Vantage Home with a Virtual Tour

Infrastructure & Enclosures
Infusion Main Power Enclosure 36 V/
2-4 modules
Part #: IMPE-2/4-IC24 - requires InFusion Controller 36Volt

Vantage's InFusion Main Power Enclosure is a key component of Vantage's lighting control centralized solution. This Main Power Enclosure houses the InFusion Controller and up to two separate control modules.

Download spec sheet

impe

The InFusion control modules that mount in the enclosure include standard, electronic and low voltage dimming and relay control. Each enclosure features new module locking mechanisms for improved in-field plug and play installation and service; allowing modules to be quickly replaced without affecting load connections to the system.

Available in two or four module configurations layout of the IMPE is simply designed through Vantage Design Center Software. The enclosure is backward compatible with installed Q and InFusion Systems and forward compatible with Vantage's enhanced modules. The two module (IMPE-2) enclosure has the capacity for 16 line feeds and up to 256 amps. The four module (IMPE-4 )has the capacity for 32 line feeds and up to 256 amps.Designed for efficient field installation, the enclosure is easily mounted between 16” o.c. studs. Electrical compatibility includes 120 - 277 VAC and 50 or 60 Hz. It has a custom fitted hinged door for recessed or surface installs to give installers easier access to the controllers and modules.

CONTROLLERS

ENCLOSURES

New Enclosure Line
Infusion Main Power Enclosure/
IMPE-2/4 module- IC24 requires InFusion Controller 24V
Infusion Main Power Enclosure/
IMPE-2/4 module -IC36 requires InFusion Controller 36V
Infusion Secondary Power Enclosure/
ISPE-2/4 module -IC requires InFusion Controller
Auxiliary Enclosures
Main Power Enclosure/MPE(R)(S)-2/4
discontinued
Secondary Power Enclosure/SPE(R)(S)-2/4
discontinued
Standard Dimmer Module /
SDM12-EM

- Infusion Terminal boards -

MODULES
TOUCHSCREENS
SENSORS
SOFTWARE
DIN STATIONS
STATIONS
HVAC INTEGRATION
AV INTEGRATION
ACCESSORIES
ENERGY MANAGEMENT SOLUTION
MOTORIZED CURTAIN RAILS

Get Acrobat Reader

Key features:

Houses one main controller and and up to two modules for the 2 module version - and up to four modules for the four module version.
Features plug-and-play fittings for all modules
Boasts an opening in the panel door providing easy access to the controller
Comes factory installed with a low-voltage wiring harness eliminating the need to wire between modules
Installs between standard 16-inch/40.64-centimeter on center framing or may be surface mounted
Custom fitted hinged door for recessed or surface installs
Allows visual diagnostics of enclosure components through ventilation slots in the cover
Enclosure Terminal Boards interchangeable for InFusion or QLink Systems

For more product information and a brief video demonstrating the new enclosure and modules in Design Center, Please Click Here