Load Controls - Dimming Stations
Standard Dimmer Module/MDS8RW201

The Vantage SCR Dimmer Module controls all dimmable loads including incandescent and fluorescent lighting, magnetic and electronic low voltage, neon, cold cathode and variable speed motors. Fuse protected line feeds safeguard the module from shorted loads.

Download spec sheet

The Vantage Standard Dimmer Module controls dimmable loads including incandescent, some fluorescent lighting, magnetic low voltage, some electronic low voltage, neon, cold cathode and variable speed motors. With its eight-load, 40-amp capacity, this module provides smooth dimming over long fade times.

Fuse protected line feeds safeguard the module from shorted loads. In the event of a short, the module would remain intact and only the included fuse would need to be
replaced. Additionally, each module is self powered which allows connected lights to stay lit even if the Master Controller is removed.

Each module is designed to easily plug into a Vantage enclosure. All AC wiring is terminated into screw terminal connectors behind the module fitting in the enclosure. This feature allows the Standard Dimmer Module to quickly clip into place after the building has been finished, eliminating the potential for damage during construction.

Key features:

• Features a plug-and-play design
• Plugs into terminal boards located inside the enclosure
• Includes fuses on the line feeds to protect the module and two additional spare fuses
• Dims fluorescent lighting, magnetic and electronic low voltage, neon, cold cathode and more
• Eliminates the need for field wiring to the module
• Enables step free ramping and dimming
• Displays the operating and fuse status with LED indicators
• Protects against thermal overload
• Features a self-powered design for uninterrupted lighting during servicing
• Offers load by load selectable override control
• Allows manual overrides to be programmed to any dim level

• Standard Dimmer Module/MDS8RW201
• Latching Relay Module/MDR8RW201

Get Acrobat Reader