Power, digital audio, analog audio, composite video, or “Y” component video status information is sent to the Vantage system as a contact state. This allows the Quad Sensor to monitor whether a device is ON or OFF and recognize the status of power and audio or video signals.

The Quad Sensor is normally connected to the contact inputs on the IRX II. However, it may be connected to other dry contact sources on a Vantage system (such as contact input stations, TheatrePoint stations, or the back of most low- voltage keypads).

Key features:

• The Quad Sensor connects from the IRX II to most third party equipment or from the TheatrePoint or Contact Input Station
• Gain and delay potentiometers for fine tuning
• Quad Sensors feature 4.5 foot (1.4m) cable
• Provides 4 products in 1 by sensing:•
  - AC Current
  - Video
  - Analog Audio
  - Digital Audio

SENSORS

• Flush mount Light & Motion Sensor 360°/
  FL-LS/MS 360°
• Mini Flushmount Motion sensor 360° II - 5 X 2,5
• Mini Flushmount Motion sensor 360° II - 10 X 5
• Remote Infrared Receiver/Q-REMOTEIR
• Surfceiling/SURFCEILING
• Quadsensor

Outdoor sensors

• LightPoint Sensor Weather Proof/Q-REMOTELS WP
  
• Rain Sensor/RAINSENSOR II
• Wind Sensor/ANEMO X-15C

SOFTWARE
DIN STATIONS
STATIONS
AV INTEGRATION
ACCESSORIES
ENERGY MANAGEMENT SOLUTION

Get Acrobat Reader