The Low Voltage Output Station (LVOS) is used for the control and automation of fluorescent loads.

Download spec sheet

Each LVOS features four low and four high-voltage connections. The Vantage station bus connects to the low voltage side, and fluorescent ballasts, motors, and tungsten lights connect to the high voltage side.

With the LVOS dry contact inputs can be added to the Vantage system. These include motion sensors, pressure sensors, magnetic switches, and more.

Key features:

• Controls up to four separate sets of fluorescent ballasts at 5 Amps each
• Offers control and automation of fluorescent fixtures
• Allows for the addition of dry contact inputs to the automation network including motion sensors, pressure sensors, magnetic switches, and more
• Installs in drop ceilings for local control of loads
• Provides control of low voltage and standard voltage loads
• Integrates LightPoint and IR

CONTROLLERS
ENCLOSURES
MODULES
TOUCHSCREENS
SENSORS
SOFTWARE
DIN STATIONS

- Keypad Stations -

• Keypad Station/KSXXXX
• RP touch Buttons
• EasyTouch II Buttons
• HiddenTouch/KH11XG-KH11XB
• Station and Faceplate Finishes
• Keypad Designer
• Britestyle Buttons discontinued
• Slave Keypad /SLAVE-1-SLAVE-2 discontinued
• Strip Switch Keypad /STRIP-1-STRIP-2 discontinued

- Other Stations -

• 4 Channel Relay Station/STR4RW201
• DMX InterfacePoint
• DALI InterfacePoint
• InfraRed LearnerII
• Infrared Emitter Station/IRXII
• Low Voltage Output Station/LVOS
• Power Station/STPSRW201-STPERW201
• RS-232 Station/Q-RS232S
• RS-485 Station/STC4RW001
• TheatrePoint/THEPT-I
  discontinued
• ILT stations and remote