With the RS-485 Communication Station, a large number of products can be controlled by the Vantage system. The RS-485 Station features full two-way communication with devices that use ASCII or Hexadecimal codes for control and automation.

Download spec sheet

Since almost all RS-485 enabled devices use one of these two communication formats, reliable integration becomes an easy process. Components that integrate into the Vantage system through RS-485 include temperature sensors, phone access systems, touch screens, computers, and more.

The RS-485 Station connects to the system through Vantage's two-wire station bus. These RS-485 stations provide an easy and reliable control solution where space is tight and the equipment requires complex commands.

Key features:

• Connects the Vantage system to RS-485 devices such as temperature sensors, phone access systems, touch screens, computers, and more
• Mounts inconspicuously inside an enclosure or behind equipment
• Installs anywhere an RS-485 port is needed
• Uses ASCII or Hexadecimal codes to control and monitor RS-485 equipment

CONTROLLERS
ENCLOSURES
MODULES
TOUCHSCREENS
SENSORS
SOFTWARE
DIN STATIONS

- Keypad Stations -

• Keypad Station/KSXXXX
• RP touch Buttons
• EasyTouch II Buttons
• HiddenTouch/KH11XG-KH11XB
• Station and Faceplate Finishes
• Keypad Designer
• Britestyle Buttons discontinued
• Slave Keypad /SLAVE-1-SLAVE-2 discontinued
• Strip Switch Keypad /STRIP-1-STRIP-2 discontinued

- Other Stations -

• 4 Channel Relay Station/STR4RW201
• DMX InterfacePoint
• DALI InterfacePoint
• InfraRed LearnerII
• Infrared Emitter Station/IRXII
• Low Voltage Output Station/LVOS
• Power Station/STPSRW201-STPERW201
• RS-232 Station/Q-RS232S
• RS-485 Station/STC4RW001
• TheatrePoint/THEPT-I
  discontinued
• ILT stations and remote