The Strip Switch Keypad further expands the flexible nature of the Vantage System. A Master Controller can address a maximum of 50 Keypad Stations.

Download spec sheet

If further keypads are needed, the Strip Switch Keypads can add one or two additional keypad buttons per Keypad Station. Each Strip Switch Keypad button has full programming capability within the Q System. These buttons can be programmed with all available functions, conditions, loads, etc.

The Strip Switch Keypad is under 1" in width and is ideal for locations where space is at a premium. It mounts cleanly in unobtrusive spaces such as door or window moldings, furniture and under bar counters.
It can be mounted directly on the wall, depending upon local codes as it is listed as a Class 2 low-voltage device.

Key features:

• Economically expands number of control points
• Economically ideal for use in unobtrusive spaces - Door moldings, furniture, window mullions and under bar counters
• Programmable as Keypad Station
• Look, Feel and Response of Keypad Station for system uniformity
• Does not count as Station towards 50-station per Master maximum

CONTROLLERS
ENCLOSURES
MODULES
TOUCHSCREENS
SENSORS
SOFTWARE
DIN STATIONS

- Keypad Stations -

• Keypad Station/KSXXXX
• RP touch Buttons
• EasyTouch II Buttons
• HiddenToucH/KH11XG-KH11XB
• Slave Keypad/SLAVE-1-SLAVE-2 discontinued
• Station and Faceplate Finishes
• Strip Switch Keypad/STRIP-1-STRIP-2 discontinued
• Keypad Designer

- Other Stations -

• 4 Channel Relay Station/STR4RW201
• DMX InterfacePoint
• DALI InterfacePoint
• Infrared Emitter Station/IRXII
• Low Voltage Output Station/LVOS
• Power Station/STPSRW201-STPERW201
• RS-232 Station/Q-RS232S
• RS-485 Station/STC4RW001
• TheatrePoint/THEPT-I discontinued
• ILT stations and remote