|SANDRA DE LANDTSHEER
Joined: 08 Jul 2008
|Posted: Tue Sep 25, 2012 9:02 am Post subject: New Vantage KNX Interface
New Vantage KNX Interface Extends Integration with KNX certified systems
High level of 3rd party integration
KNX interface enables seamless integration of KNX based devices from many different manufacturers
in the field of light, relay, scene and blind control
Vantage is excited to announce that the Vantage KNX interfacePoint is now available.
The Vantage KNX interface is a versatile bridge between the Vantage Infusion system & KNX systems making it easy to integrate KNX systems in the Vantage Infusion System.
Vantage combined with KNX linkage incorporates 3rd party devices from many different manufacturers in the field of light, relay, scene and blind control and offers seamless integration in the complete Vantage automation system. The simple and intuitive interface provides control and feedback to any Vantage touchscreen, iPad, Iphone, Android, …. With the push of a button or a simple gesture on a touchscreen, a homeowner can effortless control these KNX based devices. In addition to this the homeowner will also get status feedback visualization from all of these different functionalities. The increasing number of products by different KNX manufacturers provides a good variety of installation options.
The Interface communicates with the Vantage main controller through a network (LAN) connection. On the KNX side the interface is connected through a KNX bus terminal connector. The interface itself can be powered over ethernet (POE) or through an external power supply. The configuration is done within Vantage’s Infusion Design Center software as well as in the KNX ETS software.
The Vantage KNX InterfacePoint has been developed to implement the following functionalities:
- integrating KNX Certified Products
- controlling virtually any installation of light, relay, scene and blind control
- expanding easily the existing home automation system with new KNX based devices and functionalities
-- DIN Mountable (2 DIN units width)
-- Powered over Ethernet or through an External Power Supply 12-24V
-- AC / 12-30V DC (screw connection)
-- Low Power Consumption
-- LED indication
-- Configuration within Vantage’s Infusion Design Center software as well as in the KNX ETS software
All sort of gateways are available to obtain a perfect and complete building management solution. Vantage is optimized for any challenge in automation and integration.
Available from stock from september, 2012
Product Code : KNX-INTFPOINT
Want to know more about it?
For more technical support information, contact your sales contact.
Please feel free to contact us if you require any additional support or information.